Van Accessories

Van Guard


Rhino Products


Armaplate


Van Vault

 

Ford Transit Van Ply Lining Kits (Mk6 & Mk7 2000-2007+)

 
(Please note: The Mk6 Load Area is EXACTLY THE SAME as the MK7)

 
ford transit accessories mK6 low roof Transit Plywood Lining Kits
 

(You are here:  Van Accessories > Van Ply Lining Kits > Transit Mk6 & Mk7 Ply Lining)

 

Our Mk6 and Mk7 Ford Transit van ply lining kits are always precision cut by machine to achieve the very best quality product. Not by hand using an electric jigsaw which doesn't not do a good job at all! Rest assured that our kits are always are supplied with pre-drilled wooden panels to save you lots of time as well as effort when it comes to fitting in your new lining kit. All of our kits are made using a high quality plywood which will not split and splinter like cheap alternatives on the market. Protect your new vehicle straight away from internal damage and dents.

Every one of these kits is supplied with straight forward with easy-to-follow fitting instructions (written in English of course!) the edge sealant, aluminium trims for all of the door entries and all the fixings required to complete a very simple DIY installation into your Transit.

Please remember that Van Gadgets now also provide free support over the phone if you have any questions during the installation or before you buy. Please just give us a call or drop us an email and we will be more than happy to answer any of your questions about this item. We also have lots of different van accessories for your vehicle too, including roof racks, window grilles, locks and other van security products.

 
Protect Your Investment

Improve The Resale Value Of Your Van

DIY Ply Lining Kits Available For Most UK Vans
Present A Professional Image With Your Commercial Vehicle
 
Ford Transit Van Ply Lining Kits (Mk6 & Mk7 2000-2007+)
(Please specify if your van is fitted with or without 'Internal Cargo Rails' when ordering - SEE BELOW)

Product Code

Ply Lining Kit Components

Price Ex VAT

Order
 

PL6-SWB

 

Premium Plywood Lining Kit: 6mm Tropical Hardwood Near & Offside Full Panels, Sliding Door Top & Bottom Panels (if required), Rear Door Top & Bottom Panels, Wheel Arch Boxes + 9mm Floor With Aluminium Edging To Rear & Side Door Entries. (All Panels Are Pre-Drilled & Supplied With Fixings & Sealant).   SWB:  £175.00
PL6-MWB MWB:  £195.00
PL6-LWB LWB:  £210.00
PL6-JUMBO JUMBO:  £299.00

Product Code

Ply Lining Kit Components

Price Ex VAT

Order
 

(Please specify if your vehicle is fitted with or without 'Internal Cargo Rails' when ordering)

The above can be determined by opening the rear doors of the van and looking along each side of the wall-area of the van, about half way up you will see (if fitted) a rail used for securing loads that runs the full length of the wall load area of the van.

 

(Please also Specify if your van is FRONT WHEEL DRIVE or REAR WHEEL DRIVE when ordering)

The above can be determined by opening the NEAR-SIDE (passenger side) side loading door. If there is a small step then this means that the van is (RWD) Rear Wheel Drive (as the floor is approximately 100mm 'higher' for the RWD model. No step therefore determines that the van is (FWD) Front Wheel Drive.

 
Please don't forget, order on-line today and save TEN POUNDS OFF your order!
 
order on line save ten pounds
 

   

About Us

Order & Payment Options

Contact Us

© 2002 - 2017 New World Technology Ltd. Trading As Van Gadgets. Telephone: 01932 232100
Prices Displayed For Sale Exclude UK VAT @ 20%
VanGadgets.co.uk