Van Accessories

Rhino Van Roof Racks

Armadlock Van Locks


Van Vault


Transportable Cash/Deposit Vehicle Safes (Slot Top)...


Transportable Safes with a Cash Slot offer a baffled entry slot ideal for depositing bank notes or sealed envelopes, choose a slot that's no larger than your needs, as the level of security diminishes as the entry slot gets larger. Once through the slot your valuables drop into the safe compartment below...

  Roll Top Safes Roll Top Safes
  Slot Top Safes Slot Top Safes...
  Coin Chute Safes Coin Chute Safes
  Plain Lid Safes Plain Lid Safes

Slot Top Safes


More Info... Please Note: 'Complete Unit' safes are supplied with base plates.


Collect models require a key to enable the safe to be locked into the vehicle.
Commercial models auto-lock upon presentation to the base plate.
Suitable for cars, vans, trucks, taxis, caravans and buses.
Models that are offered as a '2 lock' option give enhanced security where the 1st lock is used to remove the safe & contents from the vehicle, then the 2nd removes the contents from the safe.
All locks are supplied with 2 keys.
Keyed alike and master key systems are available upon request.
Base plates are anchored to the vehicle floor using a fixing kit (supplied).
All dimensions are in mm (L & W dimensions = base plate 'footprint' - the actual safe is approx 5% smaller).
Product Code Description... L W H Kg Per Unit Order
WCS1SL Collect Slim Line (92 x 8 cash slot) complete unit 270 105 290 5 £210.05
WCS1SLB/A Additional Collect Slim Line Base (Base plate & anchor fitting only) 270 105 70 2 £72.20
WCS1 Collect Standard (92 x 8 cash slot) complete unit 270 155 290 6 £210.05
WCS1LP Collect Standard Short (92 x 8 cash slot) complete unit 270 155 200 5.5 £210.05
WCS1W Collect Standard Wide Slot (92 x 20 cash slot) complete unit 270 155 290 6 £210.05
WCS1B/A Additional Collect Standard Base (Base plate & anchor fitting only) 250 155 70 2 £52.20
WCS2S Commercial Slot Top (125 x 20 cash slot) 1 Lock complete unit 325 180 235 7 £293.00
WCS2S2L Commercial Slot Top (125 x 20 cash slot) 2 Lock complete unit 325 180 235 7 £325.80
WCS2F/A Additional Commercial Base (Base plate & anchor fitting only) 325 180 30 2 £27.60

Fitting Instructions

Vehicle Mounting...
1. Place the assembled safe unit into the required position (for example in the passenger foot-well for single driver vehicles or any floor area of the vehicle where the surface is flat). Check that it will not foul door, boot lids, openings etc, and that the under floor area is clear below to accept the Anchor Plate.
2. Remove the safe from its base and mark vehicle floor through fixing holes in Base.
3. Drill 1 x 12.0mm Diameter hole in each marked position.
4. Drop 10mm screws (provided) through each hole, and with Anchor Plate held in position from below, tighten screws.
5. Fit 2 x M10 lock nuts (provided) to bottom of protruding screws, tighten to captive nuts in Anchor Plate.
6. Grind or saw excess thread from bottom of protruding screws and coat with protective paint.
Concrete or Wooden Floors...
1. All of our safes are also suitable for mounting onto solid floors using M10 x 40 Rawl-bolts.
2. See steps 1, 2 & 3 above.
3. Care should be taken when tightening, do not over tighten.

Order on-line today & save an extra £10+vat off your order!
order on line save ten pounds

Please note that the above prices for our safes all exclude vat @ 20%




About Us

Order & Payment Options

Contact Us

© 2002-2021 New World Technology Ltd. - Trading As Van Gadgets. Telephone: 01932 232100
Where Applicable, All For Sale Prices Displayed Exclude UK VAT @ 20%